Type 2AB/2AB2: Two Conductor Solderless Lugs

logo-ullogo-csalogo-posi_griplogo-90crating

Type: 2AB/2AB2

  • The unique ridges formed on the bottom of the contact surface are designed to provide contact points for an electrically secure joint of the lowest resistance for current flow.
  • The screws used to clamp the conductors are designed to extend beyond the barrel sides of the conductor to allow a better, more secure compression of the conductor. This design spreads the conductor strands to help dissipate heat, and improve its pull-out safety features and capabilities.
  • The design of the wire way provides optimum transfer of current, creating a straight line flow through the connector for the least possible path of electrical resistance. A positive wire stop is also provided.



Catalog
Number
Fig. No. Screw
Type
Cond. Range
AWG
Dimensions, Inches
H W L G D* T
2AB-112 1 Slot/Hex 1/0 - 14 0.78 1.12 1.31 0.44 0.27 0.16
2AB-125 1 Slot/Hex 2/0 - 14 0.78 1.25 1.47 0.43 0.27 0.19
2AB-250 2 .31H 250 - 6 1.09 1.62 2.56 0.53 0.44 0.22
2AB-350 2 .31H 350 - 6 1.18 1.92 2.87 0.63 0.41 0.25
2AB-500 2 .38H 500 - 4 1.44 2.4 2.62 0.63 0.56 0.31
2AB-600 2 .38H 600 - 2 1.56 2.4 3.18 0.63 0.56 0.38
2AB-750 2 .38H 750 - 1/0 1.81 3.5 3.25 0.88 0.56 0.44
2AB-1000 2 .50H 1000 - 500 1.94 3.5 3.5 0.88 0.56 0.44
2AB2-350 3 .31H 350 - 6 1.18 1.92 4.25 0.63 0.56 0.25
2AB2-500 3 .38H 500 - 4 1.56 2.4 4.59 0.63 0.56 0.38
2AB2-600 3 .38H 600 - 2 1.56 2.4 4.59 0.63 0.56 0.38
2AB2-750 3 .38H 750 - 1/0 1.81 3.5 4.84 0.63 0.66 0.44
2AB2-1000 3 .50H 1000 - 500 1.94 3.5 4.94 0.63 0.66 0.44